The new USB-C power adapter that ships with MacBook Pro models can be used to power the laptop via the included USB-C charge cable, or you can plug in a USB-C to Lightning cable (or use a USB-C to
So, what you need is a USB-C 10Gbps cable with a 5A rating. This USB-IF certified Nekteck will do the job, 1 meter is the maximum passive cable length supported by the USB spec for 10Gbps. If you want a longer cable, you'll need to shell out 4-5x as much money for an active Thunderbolt 4 cable such as this Intel-certified Thunderbolt 4 2m
To set up a docking station in this case, you’ll connect one end of the cable to your laptop’s USB-C or Thunderbolt 3 port, and the other side to the USB-C input on your docking station. You’ll need to make sure to connect the cable to the docking station’s input, not another USB-C port. The input should be labeled as such.
If all you want to do is charge your HP Spectre x360, Dell XPS 13, or MSI Prestige using its Thunderbolt 4 port, you can just buy a standard USB 2.0, USB-C charging cable.

Use this cable to connect your Mac, iPhone, or iPad to a device that uses Thunderbolt 4, Thunderbolt 3, or USB-C for data transfer, such as an external hard drive or dock. It supports Thunderbolt 4, Thunderbolt 3, and USB 4 data-transfer speeds up to 40Gbps and USB 3.2 Gen 2 data-transfer speeds up to 10Gbps.

You have DisplayPort cables, Thunderbolt cables, and normal USB cables, all of which use the same plug. The connector looks the same, being USB Type-C, but Thunderbolt 4 assures you're getting the So, by chance, my MacBook Pro that has USB-C has a bulging battery and is in for repair. So I set up a 2012 Mac Mini as a temporary work machine, and then took one of the USB-C to Thunderbolt adapters I bought for the Macbook Pro, added a Thunderbolt cable, and plugged it in between the Mini (Thunderbolt 1) and the CalDigit TS3 (USB-C Thunderbolt 3). The Scarlett interface is a USB 2.0 interface, using a USB 2.0+ (e.g., USB 3.0, 3,1 etc.) cable will work, but the increased bandwidth will not offer any benefits to the signal quality or latency speed. We recommend you use the shortest USB cable you can. We do not recommend using cables longer than 2m in length. Longer cables can cause issues
Thunderbolt uses a laptop's USB-C ports through a repurposing called "alt mode," but not all USB-C ports support Thunderbolt. Alt mode also can let you plug in external monitors' HDMI and
The data signal portion of the Thunderbolt cable allowed the display to use USB ports, a FireWire port, and a Gigabit Ethernet over a single cable. More Than One Device in One Port Thunderbolt can run multiple devices from a single peripheral port because of its daisy chain functionality.
In your case you should consider the WD15 USB-C dock. It's limited to dual 1080p displays because it only uses USB Type-C rather than Thunderbolt, but that also means it can use a longer cable -- and it's cheaper. However, I haven't investigated whether the dock side uses the standard connector. .
  • pjjluk62xt.pages.dev/20
  • pjjluk62xt.pages.dev/384
  • pjjluk62xt.pages.dev/440
  • pjjluk62xt.pages.dev/217
  • pjjluk62xt.pages.dev/13
  • pjjluk62xt.pages.dev/391
  • pjjluk62xt.pages.dev/330
  • pjjluk62xt.pages.dev/253

    • can you use a usb c cable for thunderbolt